| AN29(F) series AC/DC electronic load has flexible parallel and online functions. When multiple units are connected in parallel, they can expand the current and power, meeting testing requirements of high-power single-phase power supplies. When three-phase online, a three-phase load is formed to meet the three-phase power testing requirements. Multiple units can also be connected in parallel to form a high-power three-phase electronic load.
|
Product Features
|
- CE
- Power Capacity: 1400W~ 8400W
- Working voltage is low to 2V, and up to 350Vrms
- Current range: 10Arms~60Arms, peak current: 45A~ 270A
- Frequency range: 44~ 1000Hz, DC
- Peak factor: 1.4 ~ 5.0000
- Adjustable power factor, setting range 0-1.0
- 3 units in parallel to realize 3 phase load
- Work mode: Constant current CC, constant resistance CR, constant power CP
- Current shift: current shift can be adjusted under testing
- DC: Static loading, dynamic loading, 40 programming steps
- AC: Waveform simulation, sine, 3-15 harmonic, phase gate, crest factor
- Upper/lower limits adjustment, over limit alarming(GO/NG)
- Remote voltage detect sense port, used for precise measurement, eliminate wires voltage drop
- Protection function: Over voltage, over current, over power, over heat, DC reversed polarity
- Measurement parameter: U, I, P, F and PF
|
Order information and extended functions
|
- CE
- AN29201(F): AC/DC Electronic Load 260V/10A/1400W
- AN29202(F): AC/DC Electronic Load 260V/20A/2800W
- AN29203(F): AC/DC Electronic Load 260V/30A/4200W
- AN29204(F): AC/DC Electronic Load 260V/40A/5600W
- AN29205(F): AC/DC Electronic Load 260V/50A/7000W
- AN29206(F): AC/DC Electronic Load 260V/60A/8400W
- RS485, GPIB optional
|
|
|
| Waveform simulation
|
|
|
|
|
| Power factor test: Simulate inductive and capacitive load, PF is from 0 to 1. If load current phase shift and PF are both need to set, PF can be set on front panel easily, do not need wire connection.
|
|
|
| Regulation test: Under CC mode, load current is just changing setting value, not with DUT output voltage. Please refer to the characteristic curve
|
|
|
| Dynamic performance test: Dynamic mode is switching between 2 levels in cycle, please refer to the characteristic curve. Dynamic current rising/dropping slope can be adjusted separately
|
|
|
| Programmable steps: 4 groups, 10 steps/group. 4 groups can be parallel into 40 steps, and also can be divided into separated steps
|
|
|
| Connect in parallel and series: 3 units in parallel to realize 3 phase load
|
Product Application
|
| High power single-phase power supply test
|
Technical Specifications
|
|
|
|
|